| Author |
 dolphin scr flow meter  |
|
|
khaled2040
New To Forums
Australia
22 Posts |
 Posted - 30 March 2005 : 11:28:43 PM
|
the flow meter i received with my dolphin does not show flow rate.
i only shows that the rate is matched if the an iron ball is hovering within a certain color.
my dealer said they stopped using those meter with exact flow rates since they are inaccurate.
any info. about that? |
|
|
Bubble Boy
Greenforce Australia
Sydney
Australia
2588 Posts |
Posted - 31 March 2005 : 09:49:48 AM
|
Hi Khaled,
Not sure why your dealer would say this.
Drager Probably stopped using the flowmeters with l/min and switched to Dager specifc to make flow checks easier. Also they can charge for two instead of one if you want to buy a pair.
If you want a l/min flowmeter they are made by Dwyer instruments in the USA and are in the Dwyer Minimatics range of meters. I believe (and could be wrong) that the meter part # is MM-1A. Make absolutely sure you order the right one as being a US company the range also comes in Imperial and you need the Metric one. Should be around US$25-$35
Regards
Simon
"If it makes Bubbles it probably means it's broken"
www.green-force.com
www.sydneyproject.com |
|
|
Bubble Boy
Greenforce Australia
Sydney
Australia
2588 Posts |
Posted - 31 March 2005 : 09:49:48 AM
|
Hi Khaled,
Not sure why your dealer would say this.
Drager Probably stopped using the flowmeters with l/min and switched to Dager specifc to make flow checks easier. Also they can charge for two instead of one if you want to buy a pair.
If you want a l/min flowmeter they are made by Dwyer instruments in the USA and are in the Dwyer Minimatics range of meters. I believe (and could be wrong) that the meter part # is MM-1A. Make absolutely sure you order the right one as being a US company the range also comes in Imperial and you need the Metric one. Should be around US$25-$35
Regards
Simon
"If it makes Bubbles it probably means it's broken"
www.green-force.com
www.sydneyproject.com |
|
| |
dolphin scr flow meter |
|
Topic Locked
